- Print
- DarkLight
Article summary
Did you find this summary helpful?
Thank you for your feedback
Introduction
Fields
Stored in ascLparData
SMF Field | DB Column name | Description | Unit |
---|---|---|---|
recType | Value is always 0 | ||
SMPRDMTS | startTime | Measure timestamp | |
endTime | |||
seconds | |||
sid | |||
SMLPNAM | lparName | LPAR NAME | |
SMCPCNAM | cpcName | CPC name (asc name) | |
SMLPSYP | sysplex | Sysplex name | |
SMLPSYN | systemName | LPAR System name | |
SMWSVPOL | wlmPolicy | Active WLM Policy Name | |
SMLPMSUT | r4hTrend | Trend of R4H (=/+/-) | |
SMLPLRS | demandSt | Demand Status (S, P, U, N) | |
SMLPSTIM | smfIntval | SMF interval time | |
smfTime | |||
SMLPWGT | totWeight | Weight | |
SMLPDFC | defCapMsu | Defcap | |
SMLPIMS | instMsu | Consumed MSUs during last Interval | |
SMLPR4H | r4hMsu | 4H MSU Average | |
SMLP1MS | hourMsu | Consumed MSUs during last Hour | |
SMLPWLM | wlmCapPct | % WlmCapping during last interval | |
SMLPNLP | cpCpus | Number of Logical Processors | |
SMLPMSUP | r4hPct | Ratio R4H/Defcap (%) | |
SMLPOCCN | nonCapCount | Number of consecutives Occurences where Imsu < DC | |
SMLPBIL | billMsu | Lpar Current Billing | |
SMLPPEK | maxBillMsu | Lpar Billing Peak | |
SMLPMSMN | lparMsuMin | LPAR MSU minimum limit | |
SMLPMSMX | lparMsuMax | LPAR MSU maximum limit | |
SMLPR4HA | caR4hMsu | CAT-A R4H AVERAGE | |
SMLPR4HB | cbR4hMsu | CAT-B R4H AVERAGE | |
SMLPR4HM | mobR4hMsu | MOBILE R4H AVERAGE | |
SMLPS4HA | caSmfMsu | CAT-A R4H AT SMF | |
SMLPS4HB | cbSmfMsu | CAT-B R4H AT SMF | |
SMLPS4HM | mobSmfMsu | MOBILE R4H AT SMF | |
SMWIMC0 | imp0Msu | Total Importance 0 consumption | msu/h |
SMWIMC1 | imp1Msu | Total Importance 1 consumption | msu/h |
SMWIMC2 | imp2Msu | Total Importance 2 consumption | msu/h |
SMWIMC3 | imp3Msu | Total Importance 3 consumption | msu/h |
SMWIMC4 | imp4Msu | Total Importance 4 consumption | msu/h |
SMWIMC5 | imp5Msu | Total Importance 5 consumption | msu/h |
SMWIMC6 | imp6Msu | Total Importance 6 consumption | msu/h |
actionId |